Guide to Cleaning and Safely Storing Your Swim Goggles for Longevity

You’ve invested in a great pair of swim goggles, and now you want to keep them in top condition. After all, there’s nothing worse than jumping into the pool and not being able to see clearly because your lenses are foggy or dirty.

Knowing how to clean your swim goggles properly is key. Not only will it improve your visibility in the water, but it’ll also extend the life of your goggles. Let’s dive into the steps you can take to keep your goggles clean and clear.

You don’t need expensive products or a lot of time. With just a few simple tips and tricks, you’ll be able to maintain your swim goggles like a pro. So, let’s get started on this easy-to-follow guide on how to clean swim goggles.

Key Takeaways

  • Regular and proper cleaning of swim goggles is key to extend their lifespan and improve visibility in water.
  • Remove lenses from goggles delicately, avoiding forceful pressure or sharp objects that could cause damage.
  • Rinse the goggles thoroughly in cool, clean water without any soaps or detergents to get rid of dirt and grime, paying special attention to straps and crevices.
  • Use mild, fragrance-free soap and a soft cloth or toothbrush to gently clean the lenses, leaving no residue.
  • After cleaning with soap, ensure a meticulous rinse with cool water to remove all soap residue that could cause eye irritation.
  • Allow the goggles to air dry on a clean, flat surface and store them lens-side up in a ventilated, hard-shell case away from direct sunlight or extreme temperatures to avoid damage and bacterial growth.

Proper maintenance of swim goggles involves thorough cleaning and careful storage to prevent damage and prolong their lifespan, practices that REI Co-op details in their comprehensive guide. After use, goggles should be rinsed in cold water to remove chlorine or salt, and then air-dried in a cool, shaded place, avoiding direct sunlight which can degrade the silicone and lenses, as Speedo advises. Storing goggles in a protective case when not in use is crucial to avoid scratches and other wear and tear, which SwimOutlet discusses as it extends the usability and effectiveness of the goggles in training and competitions.

Remove lenses from the goggles

After understanding the significance of regular goggle cleaning, it’s time to delve into the actual process. The first step? Lens removal.

Before you flinch at the mention of this critical step, let’s clarify. It’s not an overly complex process nor does it require any special tools. Your hands, patience, and due care are all that are necessary for this task.

With the suitable environment like a clean table or a dry towel, removing the lenses from your swim goggles can become a simple task. Always remember to handle your goggles with care to avoid any possible damage.

Start by firmly holding your goggles. Each goggle design may vary, but typically the lenses are either directly connected to the goggle frames or attached to a housing that’s part of the frame. For goggles with lenses directly connected to the frames, gently push the lens outward from the interior side of the goggle until it unhooks. If the lens is in a housing, check for a small lever or release button. Often these can be pressed or pushed to release the lens.

Regardless of the type:

  • exert gentle pressure,
  • refrain from using pointy objects as they could cause damage, or
  • avoid forcing the lens out.

By following these simple tips, lens removal will no longer be an intimidating task. Even if you feel a bit of resistance, persist with patience and delicacy.

Once the lens is removed, you’re halfway through the first step of cleaning your goggles. Now is the moment to pay attention to the tiny corners and edges, a favorite hiding place for mold and bacteria.

The next phase will take you further into this easy-to-follow goggle cleaning guide.
Remember, every step is as crucial as the previous, so do not skip any! So, let’s keep moving onto the next section dealing with gentle cleansing methods.

Rinse the goggles with clean water

Diving into this crucial step, you’ll find it’s easy yet pivotal. While the lenses of your goggles may be sparkling, the straps may still be hiding grime. Start off by filling a sink with cool, clear water. You’ve got to note that using hot water could deform the goggles, and we don’t want that.

Gently place your goggles in the sink and do some light swishing. Mindful movements here will help dislodge any leftover dirt or dust particles stuck in the corners. Make sure to pay attention to the cracks and grooves of the goggles where the straps meet the frame.

Get your hands in there and tenderly rub the goggles. Feel for any rough spots that may be buildups of grime. Don’t forego the straps either which are also prone to accumulate residue.

Have you come across any stubborn dirt patches while rinsing? If so, you would want to employ a small, soft-bristle toothbrush. This tool will be just the right ally. It is exceptionally handy for cleaning your goggles in-depth.

You’ll find that a five-minute rinse should suffice for most goggles, but those that see a lot of use may require a bit of extra love and attention. Keep in mind the goal here is to remove as much dirt, grime, and bacteria as you can.

Watch out! Avoid using soaps or detergents at this point. Although they may seem useful, these substances can leave a residue that’s tough to remove and may cause irritation to your eyes.

Clean the lenses with mild soap

After adequately rinsing your goggles, the next vital cleaning stage is to clean the lenses using a mild soap. A gentle, fragrance-free soap is the ideal choice. Your mission here isn’t just to get they’re superficially clean, but to ensure that you’ve entirely removed any residue.

Here’s the way to go about it.

Dip a soft cloth in lukewarm water and apply a small amount of mild soap to the cloth. Gently rub the cloth over the lenses in circular motions, both on the interior and exterior surfaces. Be attentive not to apply too much pressure; the objective here is to eliminate grime, not scratch your lenses.

Occasionally, you‘ll encounter more stubborn dirt patches or residue on the goggles that require a bit more effort to remove. In such cases, you can use a soft-bristle toothbrush. Wet the toothbrush in lukewarm soapy water, then brush the tougher spots gently.

It’s essential to note that extra caution should be exercised when cleaning the interior of the goggles. The interior side of swim goggles commonly has an anti-fog coating, which can be easily damaged by harsh cleaning or rubbing.

Once you’ve given your swim goggles a thorough soapy cleaning, the next phase is to ensure that you’ve perfectly rinsed off any soap. You want to avoid soap residue, as it may end up causing eye irritation. Therefore, carefully rinse the goggles under running cool water until the water runs clear without any soap bubbles.

Here’s an important insight: Avoid using detergents or soaps with strong fragrances. These might leave a residue on your swim goggles which can interfere with your vision or even cause discomfort. Stick to mild, fragrance-free soaps.

After all these cleaning steps, how can you maintain the integrity of your lenses over a long time? Moving forward, the article would handle this key question.

Rinse and dry the goggles

When you’ve made sure that your goggles are squeaky clean, rinsing and drying follows as the next crucial steps in caring for your swim gear. This is more than just a swift run under the faucet; it’s about ensuring no soap residue is left behind that could interfere with your vision or irritate your eyes while swimming.

Begin the rinse process by holding each lens under gently running tap water. Remember, the stream of water should be lukewarm, not hot—high temperature can potentially damage the delicate anti-fog layer inside the lenses.

Be meticulous in your rinsing. Soap has a way of clinging into grooves and corners, so ensure to flush out all nooks and crannies. Sloppily rinsed goggles carry a risk of introducing soap residue into your eyes the next time you swim. A few extra seconds spent on rinsing can save you from a whole lot of discomfort later on.

As for the drying stage, you don’t want to rush this either. Roughly wiping or brushing your goggles might scratch the lenses, detrimental to both their functionality and lifespan. Instead, allow your swim goggles to air dry.

Lay them out on a clean, flat surface with the lenses facing upwards. Let nature take its course and wait until the goggles are completely dry before storing them away. Doing so keeps your gear free from unwanted moisture, thereby preventing bacterial growth and unpleasant odors from setting in.

In summation, proper rinsing and drying is not only essential for maintaining crystal clear vision in the water but it also elongates your swim goggles’ service lifespan.

By now, we’re sure you have a good grip on the fundamentals of swim goggle care. But to ensure the best performance from your gear, we’ll go a step further in the next section and share tips on how to maintain the longevity of the lenses. Put these practices into action to keep your swim gear in pristine condition and your water adventures uninterrupted.

Store the goggles properly

After you’ve ensured your goggles are properly cleaned, rinsed and dried, the next step is to store them right. Yes, proper storage is equally important to maintain the longevity and clarity of your goggles. Let’s explore how you can do that.

Start by choosing a sturdy, ventilated case for your swim goggles. The ideal case should be enough to protect the lenses from scratches and have some form of ventilation to ensure any remaining moisture dries up and doesn’t encourage bacterial growth.

Remember: a hard-shell case is better than a soft bag or pouch

Now let’s move on to the actual storing process. When placing your goggles in the designated case, always lens-side up. This helps prevent the delicate lens surface from coming into direct contact with the case’s harder material, mitigating the risk of accidental scratches.

Always make sure to avoid placing any objects in the same case as your swim goggles. This could potentially damage the lenses or the delicate strap. Even if the item seems harmless, like a swim cap or towel, they could still retain moisture, which can compromise your goggles’ dryness even after meticulously cleaning and drying them.

Finally, store the goggles-case in a cool, dry location away from direct sunlight – that should simmer down any chances of bacterial growth.

Note: Extreme temperatures can wreck havoc on the goggles’ material. Always aim for a location with consistent and moderate temperature.

With these practical and easy-to-follow tips, not only will your goggles continue to provide you with crystal clear vision, but they’ll also likely last much longer.

You’d be wondering about maintaining the strap integrity over repeated uses. Let’s dive into that in the next segment.

Conclusion

Now you’ve got the inside scoop on keeping those swim goggles in tip-top shape. Remember, it’s not just about the cleaning; it’s also about how you store them afterward. That sturdy, ventilated case is your goggles’ best friend, shielding them from scratches and helping to evaporate any lingering moisture. Always store them lens-side up and alone – they’re not big on sharing space. And don’t forget to find them a cool, dry spot out of the sun’s reach. By following these simple steps, you’re not just ensuring a clear view underwater, you’re also extending your goggles’ lifespan. So, go ahead, dive in with confidence knowing your goggles are well taken care of. Stay tuned for our next piece where we’ll delve into how to keep those straps as good as new.

Q1: Why is it essential to store swim goggles properly?

Storing swim goggles correctly prolongs their clarity and lifespan. Proper storage prevents lens scratches and bacterial growth, maintaining the goggles’ overall integrity and performance during swims.

Q2: How should swim goggles be stored after cleaning, rinsing, and drying?

After cleaning, rinsing, and drying, swim goggles should be placed in a sturdy, well-ventilated case. The goggles should be stored lens-side up to avoid incidental scratches.

Q3: How can I prevent damage to my swim goggles?

You can prevent damage by avoiding storing other items with goggles that could retain moisture. It’s also essential to store the goggles in a cool, dry area, away from direct sunlight to prevent any material damage.

Q4: Can improper storage affect the clarity of goggles?

Yes, improper storage can lead to scratches on the lenses or bacterial build-up, affecting their clarity. Avoid exposing goggles to extreme temperatures and moisture for maintaining clarity.

Q5: What are the recommended places to store goggles?

Goggles should be stored in a cool, dry place away from direct sunlight. This helps prevent bacterial growth and damage resulting from exposure to extreme temperatures.

Q6: What’s the upcoming section of the article about?

The upcoming section of the article will provide additional advice on maintaining the integrity of the swim goggles’ strap. This helps extend the product’s overall lifespan.